Does bedding shrink? Understanding and preventing shrinkage
Matching products from the guide
-
biberna Melange Flannel Bedding (0840500)
Regular price From $19.95Regular priceSale price From $19.95 -
biberna Melange Flannel Bedding (0840507)
Regular price From $89.95Regular priceSale price From $89.95 -
biberna Fine Flannel Bedding (0006722)
Regular price From $89.95Regular priceSale price From $89.95 -
biberna Melange Flannel Bedding (0840517)
Regular price From $89.95Regular priceSale price From $89.95
The duvet cover fit perfectly the first time – and after the third wash, it is difficult to pull over the duvet. It is no illusion that bedding can shrink; it is a physical property of natural fibers. The good news: with quality goods, shrinkage is minimal, occurs only once rather than continuously, and with the right techniques, you can maintain the fit for years. We explain what actually happens in the fabric during washing and what you should pay attention to.
Why bedding shrinks
Cotton fibers are put under tension during spinning and weaving. The yarn is stretched, the fabric is pulled smooth during finishing – so the fabric leaves production in a slightly stretched state. When it comes into contact with warm water for the first time, the fiber swells, relaxes, and returns to its natural state. The fabric contracts: it shrinks.
Therefore, the deciding factor is how carefully the fabric was pre-treated. In a fully integrated production process, where weaving, finishing, and garment making are under one roof, this pre-shrinkage can be precisely controlled. This is exactly why residual shrinkage is usually minimal with branded quality, while very cheaply produced goods can become noticeably smaller after the first wash.
How much does bedding shrink – and which materials are affected?
A certain amount of residual shrinkage is inherent to cotton and is factored into the ready-made sizes. As a rule of thumb: most of it happens during the first wash, after which the fabric remains largely dimensionally stable. The material is more important than the pure number:
- Flannel and Melange Flannel: The brushed surface and the substantial fabric weight of 160 g/m² make the fabric robust. Flannel bedding withstands warm washing well and often feels even fluffier after washing.
- Mako Sateen: The dense 4/1 sateen weave made from combed cotton is very stable. Mako Sateen, however, prefers gentle treatment – hot washing and high dryer temperatures affect the luster and feel more than the dimensions.
- Renforcé and Linon: The lightweight plain-weave classic is uncomplicated and easy to care for. A slight initial shrinkage is normal.
- Seersucker: The crinkle texture is created by differently tensioned warp threads – here, the crinkle structure is part of the design and is preserved.
- TENCEL and Microfiber: Both are considered very dimensionally stable. TENCEL is washed at 40 °C anyway, while synthetic fibers practically do not shrink, but can become stiff if exposed to too much heat.
How different qualities shrink – a direct comparison
The question cannot be answered generally, because every quality reacts differently to water and heat. The table shows what to expect with which material – and what it can withstand in the dryer.
| Quality | What happens during washing | Dryer | Ideal for |
|---|---|---|---|
| Fine Flannel (e.g. Art. 0006722) | slight initial shrinkage, the fluffiness develops – feels softer afterwards, not smaller | yes, low setting | Autumn and winter, for those who get cold quickly |
| Melange Flannel (e.g. Art. 0840500) | very dimensionally stable, gets softer with every wash | yes, gentle cycle | Frosty noses, the whole cold season |
| Mako Sateen | dimensionally stable, but reacts sensitively to heat – luster and feel suffer before the dimensions | better on the line | Smooth, cool nights, all year round |
| Renforcé and Linon | slight initial shrinkage, then dimensionally stable for years | yes | Everyday use, guest room, year-round use |
| Seersucker | the crinkle structure is preserved, no ironing needed | no, dry hanging | Summer and for those who sweat at night |
| TENCEL | very dimensionally stable, 40 °C is sufficient – this keeps shrinkage minimal | gentle cycle | all year round, moisture-regulating |
| Microfiber | practically does not shrink, but can become stiff if exposed to too much heat | low setting | Budget option, second set |
How to prevent bedding from shrinking
You don't need to make it complicated – four points are enough:
- Follow the care label for temperature, not your intuition. 60 °C is hygienically sensible and material-friendly for cotton if the label allows it. Regularly washing hotter than intended provokes shrinkage and fiber breakage.
- Do not overload. Friction in a fully packed drum acts mechanically on the fabric. Two sets per wash cycle are usually the upper limit.
- Dry with a visual check. Heat in the dryer is a stronger driver of shrinkage than the wash water. Flannel, Melange Flannel, and terry towels can go in, but Mako Sateen and Seersucker are better off on the line. Read more about this in our guide Dryer or Clothesline.
- Pull into shape while damp. After spinning, briefly pull the cover along the seams in length and width. This compensates for mechanical distortions – and saves you the ironing.
Should you choose one size larger when buying?
No. Ready-made bedding is manufactured with factored-in residual shrinkage; standard sizes such as 135 × 200 cm or 155 × 220 cm are designed for the finished, washed product. Buying one size up leads to a cover in which the duvet slips and creates folds. Which size fits your duvet is shown in our article Bedding Sizes Explained.
A more sensible approach than adding a safety margin to the size is choosing a quality that has been properly pre-treated. Those who buy original quality directly from the manufacturer get exactly the equipment that is often omitted in retail due to price reasons. You can find an overview of our qualities in the Bedding Overview.
Two qualities where the depth of our own production is particularly noticeable: The biberna Fine Flannel bedding (Art. 0006722) from €49.95 comes with a fabric weight of 160 g/m², which carries the fluffiness – it gets softer after washing instead of smaller. The biberna Melange Flannel bedding (Art. 0840500) from €49.95 is our further development of the Flannel made from 100% cotton and is considered particularly dimensionally stable. We deliver both free of shipping costs with no minimum order value.
Frequently Asked Questions
Does bedding also shrink at 40 °C?
Yes, but significantly less. The swelling process of the fiber begins even at low temperatures – however, shrinkage is lower at 40 °C than at 60 °C or 95 °C.
Can I stretch shrunk bedding back out?
Partially. Pull the damp cover evenly into shape along the seams and let it dry flat or hanging. A strong shrinkage cannot be completely undone this way, but smaller deviations can be well compensated.
Which material shrinks the least?
Microfiber and TENCEL are the most dimensionally stable qualities, closely followed by Mako Sateen. With pure cotton, the weave matters less than the pre-treatment at the factory – that is why branded goods shrink noticeably less than very cheaply produced imported goods.
Do I need to wash new bedding before using it for the first time?
Yes, we recommend it – for hygienic reasons and because the fabric then reaches its final size. We have compiled all other care instructions in Washing and Caring for Bedding Correctly.